Call us: 507-494-5169
Hobart
Miller Electric 500588 Hobart Handler 210i, 120/240V Wire Feed Welder
SKU
MI500588
In Stock:
0
Usually Ships In:
30 business day(s)
$1,056.43
-
Free Shipping
on all ground orders -
We're Here to Help
call us at 507-494-5169 -
Safe & Secure
certified secure site
Hobart
Miller Electric 500588 Hobart Handler 210i, 120/240V Wire Feed Welder
$1,056.43
• Easy-to-use interface with infinite wire speed and voltage control for improved arc performance
• Spool gun ready: No additional control box or adapter required to connect the SpoolRunner™ 100 spool gun
• Dual voltage: Allows connection to 120 V or 240 V receptacles without tools
• Spool hub assembly accommodates 4- or 8-inch spools
• Quick Select drive roll makes setup quicker with two grooves for different size solid wire and a third for flux-cored wire
The Handler 210i is a powerful and versatile machine. Dual voltage input power gives you the flexibility to weld on either 120 or 240 volts. Connect to common 120-volt input power or 240-volt without the use of any tools. Simply choose the plug that fits the receptacle.
Weld as thin as 24 gauge up to 3/8 inch in a single pass with a broad output range of 30–210 amps. Easily run thicker materials with multiple passes. All while weighing only 26 pounds.
Quick and easy setup with Quick Select™ drive rolls which offer three grooves — two for different sizes of solid wire and a third for flux-cored wire.
Easy to set and adjust for different materials and thicknesses — features infinite wire and voltage control. Fine tune wire speed to each whole number and voltage to the 1/10th for maximum flexibility of operation.
Processes: MIG (GMAW), Flux Cored (FCAW)
Application: Metal Fabrication, Maintenance and Repair, Auto Body, Farm/Home
Input Power: 120V / 240V
Amperage Range: 120V: 30-140 A; 240 V: 30-210 A
Rated Output: 120 V, 15 A: 45 A at 16.3 VDC, 100% duty cycle
120 V, 20 A: 90 A at 18.5 VDC, 25% duty cycle
240 V: 210 A at 24.5 VDC, 25% duty cycle
Max Wire Feed Speed: 650 ipm
Weight: 26 lbs.
Dimensions: 9.75"(w) x 14.625"(h) x 20"(d)
Phase: Single Phase
Includes: 10 ft. HR-100 gun | Extra .030 and .035 in. contact tips | 10 ft. work cable with clamp | spool hub assembly | Quick Select™ drive roll for .024 in. or .030/.035 in. (0.8/0.9mm)solid and flux-cored wire | built-in gas solenoid value and dual-gauge regulator with gas hose | welding guide and material thickness gauge | owner's manual with installation, operation and maintenance guidelines
Click Here for the Hobart Handler 210i Welder Spec Sheet
Click Here for Hobart Warranty Details
• Spool gun ready: No additional control box or adapter required to connect the SpoolRunner™ 100 spool gun
• Dual voltage: Allows connection to 120 V or 240 V receptacles without tools
• Spool hub assembly accommodates 4- or 8-inch spools
• Quick Select drive roll makes setup quicker with two grooves for different size solid wire and a third for flux-cored wire
The Handler 210i is a powerful and versatile machine. Dual voltage input power gives you the flexibility to weld on either 120 or 240 volts. Connect to common 120-volt input power or 240-volt without the use of any tools. Simply choose the plug that fits the receptacle.
Weld as thin as 24 gauge up to 3/8 inch in a single pass with a broad output range of 30–210 amps. Easily run thicker materials with multiple passes. All while weighing only 26 pounds.
Quick and easy setup with Quick Select™ drive rolls which offer three grooves — two for different sizes of solid wire and a third for flux-cored wire.
Easy to set and adjust for different materials and thicknesses — features infinite wire and voltage control. Fine tune wire speed to each whole number and voltage to the 1/10th for maximum flexibility of operation.
Processes: MIG (GMAW), Flux Cored (FCAW)
Application: Metal Fabrication, Maintenance and Repair, Auto Body, Farm/Home
Input Power: 120V / 240V
Amperage Range: 120V: 30-140 A; 240 V: 30-210 A
Rated Output: 120 V, 15 A: 45 A at 16.3 VDC, 100% duty cycle
120 V, 20 A: 90 A at 18.5 VDC, 25% duty cycle
240 V: 210 A at 24.5 VDC, 25% duty cycle
Max Wire Feed Speed: 650 ipm
Weight: 26 lbs.
Dimensions: 9.75"(w) x 14.625"(h) x 20"(d)
Phase: Single Phase
Includes: 10 ft. HR-100 gun | Extra .030 and .035 in. contact tips | 10 ft. work cable with clamp | spool hub assembly | Quick Select™ drive roll for .024 in. or .030/.035 in. (0.8/0.9mm)solid and flux-cored wire | built-in gas solenoid value and dual-gauge regulator with gas hose | welding guide and material thickness gauge | owner's manual with installation, operation and maintenance guidelines
Click Here for the Hobart Handler 210i Welder Spec Sheet
Click Here for Hobart Warranty Details
