Miller 907780 Multimatic 235 Multiprocess Welder, 240V, Machine Only

• Two shielding gas connections so both gases can be left connected to the machine, no switching needed. One connection for MIG gas and one for TIG gas.
• Angled heavy-duty aluminum two-drive-roll system significantly improves wire feeding through a 15-foot gun from a 12 inch spool of wire.
• Auto-Set™ Elite offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
• Large wire drive compartment to house 12-inch wire spool to increase productivity by reducing frequency of changing smaller wire spools.
• Easy-to-understand interface with 4.3-inch color LCD display and intuitive connection setup images.

The Multimatic® 235 208 V, 220/230/240 V, multiprocess welder welds up to 3/8 in. mild steel. Versatility, easy-to-understand interface, portability. Quick and easy setup allows operators to have faster uptime and weld with confidence. Weighing only 63 pounds, the Multimatic 235 can go where the work is. Weld MIG, flux cored, stick and DC TIG with confidence.

Processes:  MIG: 170 A at 22.5 V, 60% duty cycle
Stick: 150 A at 26 V, 60% duty cycle
TIG: 180 A at 17.2 V, 60% duty cycle

Amperage Range:  20–235 A

Includes:  Power source with 7 ft. (2.1 m) power cord | 15 ft. (4.5 m) 250-amp MDX™-250 MIG gun with Bernard® AccuLock™ MDX consumables for .030/.035 in. (0.8/0.9 mm) wire | 10 ft. (3 m) cable w/electrode holder & 50 mm Dinse-style connector | 10 ft. (3 m) work cable with clamp and 50mm Dinse-style connector | Flow gauge regulator and gas hose for argon or AR/CO2 mix | Extra contact tips | .030/.035 in. (0.8/0.9 mm) reversible drive rolls | Material Thickness Gauge

Accessories:  

Click Here for the Miller Multimatic 235 Multiprocess Welder Spec Sheet



Click Here for Miller True Blue Warranty Details