Miller Smith 825-81-09 Silverline High Pressure Analytical Brass Single Stage Regulators, 2000 PSI

• Self relieving adjusting screw - Low torque control adjusting screw permits easy adjustment of pressures in closed or dead end systems.
• All regulators are 100 percent tested at the maximum rated operating pressure and are cleaned for oxygen service.
• Nickel plated body, bonnet and gauges protects the regulator from corrosion and extends service life.
• Bonnet vent hole is tapped (1/16 in) to allow for installation of captured vent to vent away gases away from the work area.
• Large 2-1/2 in single scale gauges make for easy gauge reading at greater distances from the regulator than conventional 2 in gauges.

Miller Smith Equipment 820 Silverline series regulators are designed to control high pressures from a wide variety of noncorrosive inert gases. Typical applications for this regulator include purging and charging, calibration kits, R&D laboratories, high pressure testing, chemical plants and manufacturing processes. The piston sensor design provides structural reliability in high pressure use. Low torque control adjusting screw permits easy adjustment of pressures in closed or dead end systems. Self relieving adjusting screw for easy low torque adjustment of pressure. Nickel plated body, bonnet, and gauges for superior protection. 2-1/2" single scale gauges for easy and accurate readings. Capturable vent port in bonnet to capture and vent away gases 1/16" FNPT. Body is tapped for rear panel mounting.

Series:  820 Silverline

Division:  

Gas:  Specialty Gas

Delivery Range:  0-2000

Max Inlet Pressure:  6000

CGA Fitting:  CGA 580
Click Here for the 820 Silverline High Pressure Analytical Brass Single Stage Regulators Specification Sheet


Click Here for Miller True Blue Warranty Details