TIG

Alumina nozzles are made from high strength alumina materials, have very good electrical insulating properties; exceptionally high impact resistance, heat resistance and thermal conductivity; and resist spatter build-up. They are recommended for most...

• Better weld visibility• Maximum weld zone gas protection• Positive nozzle stop for reliable weld shielding• Replacement nozzle onlyWeldtec Megaflo Glass Nozzle. Megaflo Replacement Glass Nozzle Mfg # MF1013N. For use with 1/16", 3/32" and 1/8" Tungsten...

Weldcraft 13N10 Alumina Nozzle Size: #6 (3/8") Qty: 10. Part # 13N10. Genuine Weldcraft replacement parts are engineered to work with all popular TIG torches. Package of 10 Series:  4 Series Package:  10

CK Worldwide 3 series reverse collet for use with CK150, CKC150, CK210, CK300, CK510, TL210, TL300, TL18, TL26, FL3L, 17,18,and 26 Torches. Package of 1 Series:  3 Series Package:  1What Series is my Torch?  Knowing the...

Joy Stick Switch & Rubber Cover Boot - Momentary. Torch Series: All. Package of 1 For Use With:  Weldtec All Models Package:  1

Weldcraft Gas Lens 3/32" (2.4mm) Qty=2. Size: 3/32" (2.4mm) Part # 45V26. Genuine Weldcraft replacement parts are engineered to work with all popular TIG torches. Optimize shielding gas coverage by using an appropriate size gas lens. Gas lenses help...

1/8 Gas Lens Collet Body. Package of 2. Series:   For Use With:  Weldtec 17, 18, 26 TorchesPackage:  2

Weldcraft Large Diameter Gas Lens 3/32" (2.4mm) Qty = 1 Size: 3/32" (2.4mm) Part # 45V64. Genuine Weldcraft replacement parts are engineered to work with all popular TIG torches. Optimize shielding gas coverage by using an appropriate size gas lens. Gas...

3/32 (2,4) Collet Body. Torch Series: 17, 18, 26, 28, 29, Sw-418. Package of 2 Series:   For Use With:  Weldtec 17, 18, 26, 28, 29 TorchesPackage:  2

Head, 70 Deg. (Same As 1726). Torch Series: I - Head (Ball Joint, Flex), Sf-225. Package of 1 Series:   For Use With:  Weldtec i - HEAD (ball joint, flex), SF-225 Torches

• Save up to 40% of shield gas consumption• Provides better gas coverage versus standard collet bodies• Tungsten stick-out can be up to 6 times the electrode diameter• Less expensive replacement parts than standard gas lenses• Fits most standard silicone...

• 1.5% Lanthanated (Gold) EWLa-1.5/WL15• Principal Oxide: 1.3 –1.7% Lanthanum Oxide• Non-Radioactive. Best for use in Direct Current (D/C) as an alternative to 2% Thoriated using inverter or transformer based constant current power sources.• Best for non...

This TIG foot pedal controls the amperage when TIG welding. Depress pedal to increase current. Depressing pedal fully achieves maximum set current. Fully raising the pedal finishes the weld and starts the after-flow cycle. This foot pedal will give the...