Norton 66261119274 5x7/8 In. Charger R822 ZA Center Mount Fiberglass Conical Flap Discs, Coarse, P60 Grit, 5 pack

• Type 29 conical flap discs with zirconia alumina plus abrasive for aggressive cut and long life
• Angled polyester/cotton flaps provide greater surface contact and are the best choice when speed of job completion and stock removal are primary considerations
• Fiberglass/resin backing plates are the most popular plate configuration due to high strength, light weight, ability to absorb vibration, and operator comfort
• Excels on titanium, alloys, cast iron, soft carbon and stainless steel
• Excellent choice for coarse grit blending, deburring, and stock removal; may be used on contour and edge work

When speed and accuracy matter, choose this Charger R822 coarse grit center mount fiberglass conical flap disc for use with your right angle grinder on contour and edge work. The angled flaps provide greater surface contact, and the fiberglass/resin back plates absorb vibration well for operator comfort. This disc is an excellent choice for blending, beveling, deburring and stock removal in the collision repair, contracting, manufacturing and metal fabrication industries, thanks to the zirconia alumina abrasive that provides an aggressive cut and performs two to three times better than aluminum oxide products. Package of 5.

Material:  Zirconia Alumina

Diameter:  5"

Arbor:  7/8"

Type:  29

Grit:  P60

Max RPM:  13000

Package:  5

Series:  Charger